High-Performance Single Axis MEMS Capacitive Accelerometers from Silicon Designs Support Zero-to-Medium Frequency Automotive, Industrial, Robotics and Instrumentation Applications

Kirkland, Washington, USA - Silicon Designs, Inc., a U.S. based and veteran-owned designer and manufacturer of highly rugged commercial- and inertial-grade MEMS capacitive accelerometer chips, modules, and supporting data acquisition, today announced its high-performance single axis Model 2220 Series,

 

Available in eight standard ranges from ±2 g to ±400 g, the single-axis Model 2220 Series combines an integrated low-noise, nitrogen-damped, fully calibrated MEMS capacitive accelerometer chip together with high-drive, low-impedance buffering. Sense elements are contained within an epoxy-sealed, rugged anodized aluminum housing.  This design allows the Model 2220 Series to reliably withstand shock inputs of up to 5000 g and standard operating temperatures from –55°C to +125°C. The accelerometers also provide superior bias performance, including a temperature shift coefficient of -100 to +100 PPM of span/°C and a scale factor temperature shift coefficient of -150 to +50 PPM/°C.  Model 2220 Series accelerometers further respond to frequencies from zero (DC) to more than 2000 Hz, with a choice of either two analog ±4 V (differential); or 0.5 to 4.5 V (single-ended) outputs, both of which vary with acceleration. At zero acceleration, output differential voltage is nominally 0 VDC (DC response). Onboard voltage regulation also minimizes supply voltage variation effects.

 

All Silicon Designs MEMS capacitive accelerometers, chips, and dies are 100% designed, manufactured, assembled and tested at the company’s state-of-the-art global corporate headquarters and R&D center, located just outside of Seattle, Washington. Each module is serialized for traceability and is fully calibrated prior to shipment.

 

The high-performance, low-impedance design of the Model 2220 Series makes it ideal for vibration and acceleration sensing within industrial and commercial environments. The accelerometers are also particularly beneficial within zero-to-medium frequency instrumentation applications, where low mass (10 g) and small size (1" by 1" by 0.3") can help to minimize mass loading effects, and where reliability and accuracy are key.

 

Typical applications supported by the Model 2220 Series include aircraft flight and flutter testing, automotive RLDA, industrial vibration monitoring and analysis, robotics, biomechanics, industrial machinery and equipment control, modal and structural analysis, crash event detection, and general in-laboratory testing. To learn more about the Model 2220 Series, or other products from Silicon Designs, visit www.silicondesigns.com.

 

 

PR Author/Advertising/Editorial Inquiries:
Molly Bakewell Chamberlin
President/Sensors Industry Subject Matter Expert
Embassy Global, LLC
Tel: +1.716.646.0927
inquiries@embassyglobalpr.com   
 

 

 

Please reload

Featured Posts